cleaning the throttle body may require someone with a tech 2 or higher to be able to rest the computer. I see a lot of towed GM cars that owners cleaned the throttle body and it set a hard code in the computer. check your fuel pressure. sounds like a fuel problem either cold start valve bad or...
side to side is easy. Just loosen the rear hinge bolt on the hood on one side and the leading bolt on the other side. just a little is all that is needed. you can just push the hood over a little a this point. if the hood does not slip on the hinge ,Tightnen the two bolts and loosen the other...
Maintenance on an 04/05 is going to be higher with less resale value than a 06/07 . That is a very strong retail price. That should get you an 06 with 60k miles in good shape from the ones I am seeing sold.
The cats area matter of driving style and fuel used .I have seen 90/100 thousand mile...
we have 2 members at present that are testing the work around on the 04-05 module and so far they are working fine . Been installed for about 4 months at present.
It will not be sold as it has to be installed and set up by someone that knows what they are doing . . it is not a corvette module...
If the module is bad the non mag shocks with sims will give you a proper suspension. With a bad module and mag shocks they are only working at one setting and if they are leaking then you basically have no shocks at all. I sent you a PM Fzjadam
thats unusual . It does sound bad.
I have replaced maybe 3 in 6 years . not really a known problem. I would as suggested make sure the tension idler is not locked up and moving freely. i would suspect something is out of line with the belt .The water pump location provides for not that much...
You are correct. Just like the rear sway bar install. I have done 15 or so and never had a customer not like them .If someone does not want to put them on they dont know what they are missing. I had a customer bring a newer25k mile 08 that the was looking at but said it did not ride as well as...
above information is not for the Corvette /XLR but for the German?Asian market. Cut and paste is not your friend when you do not know what you are reading. You need to correct the wrong information and if you want to continue to argue contact Bilstein and tell them they are wrong . I can tell...
Ian when you cut and paste information learn to read when its something you know nothing about .You are wrong about the shocks and continue to be wrong. Please apologize to the community for all the wasted time on the subject and incorrect information you have posted.
here is a direct email...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.